In the Lab: UK Research on Materials for Electrochemical Devices
Johnson Matthey Technology Review features new laboratory research
5 September 2019
By Jacqueline Edge
Americas International Meeting on Electrochemistry and Solid State Science 2018
Battery highlights include lithium metal anodes, solid state conductive materials, interface engineering and electrolyte additives
8 April 2019
Reviewed by Enrico Petrucco
Designing Parameters of Surfactant-Free Electrochemical Sensors for Dopamine and Uric Acid on Nitrogen Doped Graphene Films
Evaluating the correlation between the content of N-configurations and the sensing for electrochemically active molecules
26 February 2019
By Boitumelo Matsoso, Tsenolo Lerotholi, Neil Coville and Glenn Jones
“Nanopatterned and Nanoparticle-Modified Electrodes”
Edited by Richard C. Alkire (University of Illinois, USA), Philip N. Bartlett (University of Southampton, UK) and Jacek Lipkowski (University of Guelph, Canada), Advances in Electrochemical Science and Engineering, Volume 17, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2017, 432 pages, ISBN: 978-3-527-34094-1, £125.00, US$205.00, €141.30
15 January 2019
Reviewed by Edwin Raj and Alex Martinez Bonastre
High Energy Density Material (HEDM) – Progress in Research Azine Energetic Compounds
Synthesis, properties and applications of high energy density material (HEDM) –azine energetic compounds
14 January 2019
By Chen Yongjin and Ba Shuhong
Making the Most of Precious Metal Nanoparticles in the Purification of Industrial Wastewater by Catalytic Wet Air Oxidation
Revealing synergy between platinum and catalyst support
3 October 2018
By Korrin Saunders, Dafydd Davies, Stan Golunski, Peter Johnston and Pawel Plucinski
Oxidative Degradation of Phenol using in situ Generated Hydrogen Peroxide Combined with Fenton’s Process
Supported palladium-iron catalysts for the removal of model contaminants from wastewater
3 October 2018
By Ricci Underhill, Richard J. Lewis, Simon J. Freakley, Mark Douthwaite, Peter J. Miedziak, Ouardia Akdim, Jennifer K. Edwards, Graham J. Hutchings
Using Catalytic Heat Recovery to Improve Efficiency of Gasoline Spark Ignition Engines
Chemical efficiency calculations predict fuel economy improvements up to 14%
18 September 2018
By Perry Leung, Athanasios Tsolakis, José Herreros, Miroslaw Wyszynski and Stan Golunski
5th International Symposium on Modeling of Exhaust-Gas After-Treatment (MODEGAT V)
The latest developments in computer simulation of vehicle emissions control catalysts and systems
22 August 2018
Reviewed by Djamela Bounechada, Iain Hitchcock and Tim Watling
Additive Layer Manufacturing of Catalytic Static Mixers for Continuous Flow Reactors
Versatile technique provides economic and practical advantages to the flow chemist
3 July 2018
By Christian Hornung, Shravan Singh and Simon Saubern