MODEGAT V | Vehicle emissions control catalysts Symposium Report

Page 1 of 812 3 4 5 6 7 8 Next

A Review of Measurement Techniques of Mechanical Properties of the Catalyst Layer in Catalytic Converters

Existing methods and two new methods to measure the cohesive and adhesive strength of a catalyst layer are reviewed
14 June 2019

By Jiankai Yang, Agba Salman and Patricia Blanco-García

High Energy Density Material (HEDM) – Progress in Research Azine Energetic Compounds

Synthesis, properties and applications of high energy density material (HEDM) –azine energetic compounds
14 January 2019

By Chen Yongjin and Ba Shuhong

Key Technical Contents of the China VI Emission Standards for Diesel Fuelled Heavy-Duty Vehicles

New stringent emissions legislation aims to ‘win the blue sky defence war’ in China
2 January 2019

By Li Gang, Yuan Ying, Zhang Minghui,
Zhao Xin and Ji Liang

Making the Most of Precious Metal Nanoparticles in the Purification of Industrial Wastewater by Catalytic Wet Air Oxidation

Revealing synergy between platinum and catalyst support
3 October 2018

By Korrin Saunders, Dafydd Davies, Stan Golunski, Peter Johnston and Pawel Plucinski

Oxidative Degradation of Phenol using in situ Generated Hydrogen Peroxide Combined with Fenton’s Process

Supported palladium-iron catalysts for the removal of model contaminants from wastewater
3 October 2018

Oxidative Degradation of Phenol using <em>in situ</em> Generated Hydrogen Peroxide Combined with Fenton’s Process

By Ricci Underhill, Richard J. Lewis, Simon J. Freakley, Mark Douthwaite, Peter J. Miedziak, Ouardia Akdim, Jennifer K. Edwards, Graham J. Hutchings

Using Catalytic Heat Recovery to Improve Efficiency of Gasoline Spark Ignition Engines

Chemical efficiency calculations predict fuel economy improvements up to 14%
18 September 2018

By Perry Leung, Athanasios Tsolakis, José Herreros, Miroslaw Wyszynski and Stan Golunski

9th Carbon Dioxide Utilisation Summit 2017

Latest advances in routes to renewable fuels and chemicals, reducing global greenhouse gas emissions
11 September 2018

Reviewed by Gareth Williams

STEPWISE Project: Sorption-Enhanced Water-Gas Shift Technology to Reduce Carbon Footprint in the Iron and Steel Industry

An introduction to the project, its aims and its technology
4 September 2018

By Eric van Dijk, Paul Cobden, Liliana Lukashuk, Leon van de Water, Magnus Lundqvist, Giampaolo Manzolini, Calin-Cristian Cormos, Camiel van Dijk, Luca Mancuso, Jeremy Johns and David Bellqvist

Additive Layer Manufacturing of Catalytic Static Mixers for Continuous Flow Reactors

Versatile technique provides economic and practical advantages to the flow chemist
3 July 2018

By Christian Hornung, Shravan Singh and Simon Saubern

In Situ and Operando Spectroscopy: A Powerful Approach Towards Understanding Catalysts

Revealing reaction mechanisms to find the correlation between structure and surface composition
28 June 2018

<em>In Situ</em> and <em>Operando</em> Spectroscopy: A Powerful Approach Towards Understanding Catalysts

By Liliana Lukashuk and Karin Foettinger