Johnson Matthey Technol. Rev., 2018, 62, (4), 403
《可持续水处理：创新技术》是对出版过的相关文献的汇编，共包含 10 章内容。主要内容经 Zainura Zainon Noor 和 Noor Salehan Mohammad Sabli 编辑，前者主要参与的研究领域包括水处理中的绿色技术，是绿色技术研究集团和水环境管理研究所的负责人，同时还是后者的导师。Noor Salehan Mohammad Sabli 博士学习的研究课题是为粗制棕榈油生产制定水足迹框架，以便计算生产粗制棕榈油的用水量。本书主要展示了在工业水处理技术方面开展的大量研究。其中介绍了多种创新方法，包括以前被当做是废物的组分，现用于生产高价值化学品的中间体。因此本书对于对废水处理领域感兴趣的研究者，以及希望运用创新技术解决废水问题的行业具有一定的吸引力。
“Sustainable Water Treatment: Innovative Technologies”
Edited by Zainura Zainon Noor and Noor Salehan Mohammad Sabli (Universiti Teknologi Malaysia, Johor, Malaysia), Taylor and Francis Group LLC, Boca Raton, USA, 2017, 184 pages, ISBN: 978-1-138-03324-5, $143.96, £91.20
- Reviewed by Panayiotis Theophanous§, Seb Grizard*
- Johnson Matthey, PO Box 1, Belasis Avenue, Billingham, Cleveland, TS23 1LB, UK
§Present address: AB Sugar, Sugar Way, Peterborough, PE2 9AY, UK
“Sustainable Water Treatment: Innovative Technologies” is a compilation of papers previously published elsewhere presented as 10 chapters. These have been edited by Zainura Zainon Noor, whose research is heavily involved in green technologies in water treatment while she also leads the Green Technology Research Group and the Institute of Water and Environmental Management, and Noor Salehan Mohammad Sabli, a PhD student under the supervision of Zainura Zainon Noor focusing on developing a water footprint framework for the calculation of water usage in crude palm oil production. The book presents ongoing research in technologies utilised for industrial water treatment. It describes innovative approaches such as streams previously considered waste being utilised as intermediates in the production of high value chemicals. It would therefore appeal to researchers with an interest in the area of wastewater treatment as well as industries with research capabilities looking to apply innovative technologies to address wastewater issues.
The book is divided into three sections. Section I presents research on biological processes used to treat wastewater with a focus on palm oil effluent either from the process of production or the point of end use. Section II describes membrane bioreactor technologies. Section III presents advanced chemical-physical processes for industrial wastewater treatment. The chapters vary from presenting research with testing and results on enzymatic hydrolysis of waste cooking palm oil to a technology review of membrane bioreactors.
Innovative Biological Processes for the Recovery of Value-Added Products from Wastewater
Section I presents research on biological processes used to treat wastewater with a focus on palm oil effluent whether from palm oil mills or from cooking palm oil that finds its way to wastewater. Of great interest is the paper by Qistina Ahmad Kamal and Nor Azimah Mohd Zain that presents bioremediation of palm oil mill effluent (POME) for itaconic acid production. Itaconic acid, known as methylene butanedioic acid or methylene succinic acid, is an unsaturated dicarboxylic acid which has high potential as a replacement for acrylic or methacrylic acid in polymers. It functions as plastic, adhesive, elastomer and coating in its polymerised forms such as methyl, ethyl or vinyl ester. New findings suggest it can be used in the making of artificial glass, bioactive compounds in agriculture and pharmaceuticals. It is produced by the filamentous fungi Aspergillus terreus and Aspergillus itaconicus and its synthesis is uneconomical as the substrate cost is high relative to the low yield it produces (Figure 1).
The researchers use Aspergillus terreus to produce itaconic acid using POME as an alternative low cost substrate. The investigation is around the potential for maximising yields by immobilising the biology in poly(vinyl alcohol) (PVA)-alginate beads. The results have not been promising as POME does not have a higher yield than a glucose or sucrose substrate. Translation of these results to a larger scale is also not considered.
Membrane Bioreactor Technologies
Section II contains recent research on membrane bioreactors (MBR). The work described ranges from the use of MBR for removal of micropollutants in spent caustic water, to integration of MBR with other treatment systems and the outlook on future MBR technologies. The review paper written by Rabialtu Sulilah Ibrahim, Adhi Yuniarto and Siti Nurhayati Kamaruddin on the outlook of MBR technologies presents the benefits of MBR against conventional activated sludge processes in terms of cost, footprint, power usage and effluent quality achieved. Advanced MBR technologies such as a combination of MBR with a bio-electrochemical cell to reduce membrane fouling are presented. Other examples include a submerged membrane electro-bioreactor combining biological, electrokinetic and membrane filtration. The paper also discusses the growth of the MBR market presenting figures such as US$888 million by 2017 at a rate claimed to be faster than other membrane systems.
Advanced Chemical-Physical Processes for Industrial Wastewater Treatment
In Section III technologies are presented for the treatment of wastewater from industries such as pharmaceuticals and fabrics production. VOCs are described by their predominant anthropogenic sources such as chemicals production as well as biological sources such as isoprene from plants. Current technologies for the treatment of VOC in wastewater are discussed. Nonthermal plasma by gas discharge when applying an electric potential between two electrodes was tested for effectiveness in VOC destruction (Figure 2).
Due to the high density of water, nonthermal plasma application would require an electric field several orders of magnitude larger than a gas system would require. An integrated air stripping and nonthermal plasma system was therefore used to determine effectiveness of treating wastewater containing toluene and xylene. Increasing voltage achieved an increased removal efficiency for toluene with 12.32 kV resulting in 59.8% removal and 15.68 kV resulting in 92% removal. Water, carbon dioxide, carbon monoxide and nitrous oxide gases were detected and identified as byproducts of toluene and xylene decomposition.
The book contains a good range of technologies for the treatment of wastewater. It provides solutions that find application within several industries and merit more research to determine their effectiveness and most importantly their scalability. It would make a good starting point for industry based research but would not be appropriate for readers without some background knowledge in wastewater treatment.
P. Bonnarme, B. Gillet, A. M. Sepulchre, C. Role, J. C. Beloeil and C. Ducrocq, J. Bacteriol., 1995, 177, (12), 3573 LINK https://doi.org/10.1128/jb.177.12.3573-3578.1995
H. H. Kim, G. Prieto, K. Takashima, S. Katsura and A. Mizuno, J. Electrostat., 2002, 55, (1), 25 LINK https://doi.org/10.1016/S0304-3886(01)00182-6
Panayiotis Theophanous was a Senior Process Engineer within the Oil and Gas business of Johnson Matthey. He holds a MSc in Water and Wastewater Engineering from Cranfield University, UK, and worked on purification technologies for natural gas.
Seb Grizard is Purification Technical Service Manager with the Gas Purification department at Johnson Matthey in Chilton, UK.