Intensified Liquid-Liquid Extraction Technologies in Small Channels: A Review
14 October 2019
By Panagiota Angeli, Eduardo Garciadiego Ortega, Dimitrios Tsaoulidis, Martyn Earle
Continuous Production of Squalane Using 3D Printed Catalytic Supports
Additive manufacturing confers advantages for catalyst support design
4 July 2019
By Sonia García, Stephen Poulston, Deena Modeshia, Petr Stavarek, Massimo Ujcic, Farzad Lali, Manuel Alves, José Araújo, Michael Krusche, Frank Ullrich, Diana Maier
Guest Editorial: Continuous Manufacturing at Johnson Matthey For Pharmaceutical Applications
14 June 2019
By Garrett Dilley
10th International Symposium on Continuous Flow Reactor Technology for Industrial Applications
Continuous being implemented for pharmaceutical manufacturing with advantages in EHS, quality and cost
30 May 2019
By Steve Pollington
Editorial: Sensors in Industrial Applications
12 March 2019
By Sara Coles
STEPWISE Project: Sorption-Enhanced Water-Gas Shift Technology to Reduce Carbon Footprint in the Iron and Steel Industry
An introduction to the project, its aims and its technology
4 September 2018
By Eric van Dijk, Paul Cobden, Liliana Lukashuk, Leon van de Water, Magnus Lundqvist, Giampaolo Manzolini, Calin-Cristian Cormos, Camiel van Dijk, Luca Mancuso, Jeremy Johns and David Bellqvist
Additive Layer Manufacturing of Catalytic Static Mixers for Continuous Flow Reactors
Versatile technique provides economic and practical advantages to the flow chemist
3 July 2018
By Christian Hornung, Shravan Singh and Simon Saubern
“Surface Treatments for Biological, Chemical and Physical Applications”
Edited by Mehmet Gürsoy and Mustafa Karaman (Selçuk University, Konya, Turkey), Wiley-VCH Verlag GmbH & Co, Weinheim, Germany, 2017, 312 pages, ISBN: 978-3-527-34083-5, £95, €114
17 May 2018
By Alexander de Bruin
Challenges and Opportunities in Fast Pyrolysis of Biomass: Part II
Upgrading options and promising applications in energy, biofuels and chemicals
21 February 2018
By Tony Bridgwater
Challenges and Opportunities in Fast Pyrolysis of Biomass: Part I
Introduction to the technology, feedstocks and science behind a promising source of fuels and chemicals
16 January 2018
By Tony Bridgwater