Johnson Matthey Technol. Rev., 2021, 65, (3), 466
《Johnson Matthey Technology Review》重点强调新研究
In the Lab: Research and Development in the Field of (Renewable) Gas Processing Technology at DBI Group
Johnson Matthey Technology Review features new research
DBI Group’s field of activity covers the complete process development of chemical processes, starting with the process balancing and testing of catalysts including the determination of catalyst-specific reaction kinetics, up to lifetime investigations, ageing tests and other reaction engineering investigations. With the data obtained, complex mathematical models can be generated which can be used for the design of reactors or the optimisation of operating regimes. In addition, the company also applies its know-how in the field of mathematical models in application-oriented simulations of thermal processing plants, heat exchangers and gas treatment plants. On the basis of these models, it designs demonstration plants which provide important design fundamentals and technical-scientific correlations for large-scale applications.
About the Research
Individual Solutions for Complex Challenges
The use of renewable gases as well as the integration of regenerative energies offer great ecological and economic potential, provided the applied methods take the application-specific boundary conditions into account. DBI Group’s research and development therefore is focused on innovative technologies that tap new raw materials and applications or make a significant contribution to increase the efficiency of existing processes. These include: development of reformer systems for decentralised hydrogen production; on-site production of technical gases (carbon monoxide, hydrogen); hydrogen utilisation (heat and power); power-to-X technologies (dimethyl ether (DME), methanol); usage of biogas as raw material for chemicals, fuels and pharmaceutical products; catalytic gas treatment; and hydrogen recovery.
Dr Stephan Anger
Services Provided by DBI Group
DBI Group’s activities are focused on the development of innovative processes and the optimisation of existing processes (Figure 1). It supports its customers in the scope of research, development and engineering from basic research to the design of process equipment and the development of complete processes. These include: design and construction of process plant equipment; high-temperature heat exchangers; evaporator/condensers; reactors/adsorbers; post-combustion chambers; catalyst testing; screening of catalyst materials; performance and ageing tests; kinetic analysis; modelling and simulation; process modelling; simulation of apparatus; process and technology development from idea to semi-technical plants; thermal engineering; load management gas; feasibility and potential studies.
Direct Synthesis of Dimethyl Ether from Renewable Resources (“FlexDME”)
The production of synthetic fuels from renewable resources such as biomass and sustainably produced energy is an important step on the way towards sustainable energy supply. Especially, DME is a promising fuel because of the excellent combustion properties and high energy density. Therefore it can be used as a first ‘green’ admixture for liquefied petroleum gas and as a substitute for diesel with low-pollutant exhaust. In addition, DME is already applied as a propellant in aerosol cans of high-priced mass products such as hair or paint spray as well as a basic material in the chemical industry. The developed process is characterised by continuous operation with biogas and optional addition of hydrogen, which can be obtained from surplus electricity by electrolysis of water (Figure 2).
An innovative reactor concept was developed based on a self-developed kinetic model for single step DME synthesis. With the results of the simulations, a small-scale demonstration plant was developed (Figure 3).
The experimental investigations have shown that biogas and additional hydrogen from electrolysis can efficiently be converted into the biofuel DME. Because of the promising results it is planned to build and run a demonstration plant directly connected to a biogas plant in a larger scale.
Hydrogen Generated for Industry (“HydroGIn”)
The aim of this project is the development of a demonstration plant for the on-site generation of purified hydrogen from natural gas for industry and electrical mobility with a nominal capacity of 100 m3 h−1.
The system comprises all modules required for the entire hydrogen production process (Figure 4): natural gas and process water conditioning (desulfurisation, deionisation); gas conversion reactor (steam reforming, carbon monoxide conversion); and hydrogen purification (pressure swing adsorption).
In order to meet today’s requirements of system mobility and flexibility, the process plant can be integrated into a standard container. The system is designed to perfectly fit all operators of facilities that require a decent but continuous amount of hydrogen below the capacities of traditional process plants. More than the economic advantage, the on‐site production drastically reduces emissions due to reduced transportation.
Characteristics of the on-site hydrogen production system include: 100 m3 h−1 hydrogen production rate; hydrogen purity: 99.95%; fuel: natural gas or biogas; process: steam reforming; operating pressure: 20 bar. Fields of application include: reducing or protective atmospheres for industrial furnaces, electrical industry, semiconductor industry, welding, cutting and hydrogen fuel stations.
- M. Friedel, ‘Direct Synthesis of Dimethyl Ether (DME) from Renewable Materials’, Annual Meeting of the ProcessNet Specialist Group for Energy Process Engineering and the Working Comittee for Thermal Energy Storage, 6th–7th March, 2019, Frankfurt am Main, Germany, DECHEMA-Haus, Frankfurt am Main, Germany, 2019
- M. Friedel, ‘Alternative Use of Biogas’, Biogas Convention and Trade Fair, 10th–12th December, 2019, Nürnberg, Germany, DBI - Gastechnologisches Institut gGmbH, Freiberg, Germany, 2019
- M. Kühn, J. Nitzsche and H. Krause, ‘Direkte Methanisierung von Biogas für Power-to-Gas-Anwendungen’, Energie Wasser-Praxis, 2018, (10), 44
- J. Schipek, ‘Reduzierung von Methanemissionen an Messstellen im Gasnetz’, gwf-Gas Energie, 2020, (4), 46 LINK https://gwf-gas.de/produkt/reduzierung-von-methanemissionen-an-messstellen-im-gasnetz/
- H. Schmid, J. Schipek and J. Nitzsche, ‘Verfahren und Komponenten zur Entschwefelung von Erdgas für Brennstoffzellen-KWK-Anlagen’, gwf-Gas Energie, 2019, (6), 60 LINK https://gwf-gas.de/produkt/verfahren-und-komponenten-zur-entschwefelung-von-erdgas-fuer-brennstoffzellen-kwk-anlagen/
- M. Friedel, ‘Direct Synthesis of Dimethyl Ether (DME) from Renewable Resources’, 9th International Freiberg Conference, 6th June, 2018, Berlin, Germany, Technical University Bergakademie Freiberg, Germany, 2018 LINK https://tu-freiberg.de/sites/default/files/media/professur-fuer-energieverfahrenstechnik-und-thermische-rueckstandsbehandlung-16460/publikationen/24-05-180606_direct_synthesis_of_dimethyl_ether_dme_dbifreiberg.pdf
- S. Anger, R. Manig, T. Raabe, J. Nitzsche and H. Krause, ‘Potentiale zur rußfreien Synthesegaserzeugung durch trockene Reformierun’, gwf-Gas Energie, 2016, (3–4), 252 LINK https://gwf-gas.de/produkt/untersuchungen-zur-russfreien-synthesegaserzeugung-aus-biogas-mittels-trockener-reformierung/
- S. Anger, ‘Investigations on the Process Gas Treatment of LPG for the Steam Reforming in Fuel Cell CHP Systems’, Dissertation, Faculty of Mechanical, Process and Energy Engineering, Technische Universität Bergakademie Freiberg, Germany, 2016
- M. Friedel, J. Nitzsche and H. Krause, ‘Catalyst Screening and Reactor Modeling for Oxidative Methane Coupling to Increase the Heating Value of Biogas’, Chem. Ing. Techn., 2017, 89, (6), 715 LINK https://doi.org/10.1002/cite.201600018
These research works were supported by the German Federal Ministry of Economics and Technology (BMWi) through the Project Management Jülich (PTJ) under the project number 03EIV121D (FlexDME) as well as by the German Federal Ministry of Education and Research (BMBF) through the German Aerospace Center (DLR) under the project number 01LY1410A (HydroGIn)