State-of-the-Art Iridium-Based Catalysts for Acidic Water Electrolysis: A Minireview of Wet-Chemistry Synthesis Methods
Preparation routes for active and durable iridium catalysts
5 March 2021
By Himanshi Dhawan, Marc Secanell and Natalia Semagina
Optimising Metal Content in Platinum Group Metal Ammonia Oxidation Catalysts
A technical review of catalyst design methods
1 December 2020
By Julie Ashcroft
Biocatalytic Reduction of Activated Cinnamic Acid Derivatives
Asymmetric reduction of C=C double bonds using Johnson Matthey enzymes
13 October 2020
By Samantha Staniland, Tommaso Angelini, Ahir Pushpanath, Amin Bornadel, Elina Siirola, Serena Bisagni, Antonio Zanotti-Gerosa and Beatriz Domínguez
Unlocking the Full Evolutionary Potential of Artificial Metalloenzymes Through Direct Metal-Protein Coordination
A review of recent advances for catalyst development
17 September 2020
By George Biggs, Oskar Klein, Sally Boss and Paul Barker
Plasma Catalysis: A Review of the Interdisciplinary Challenges Faced
Realising the potential of plasma catalysis on a commercial scale
19 March 2020
By Peter Hinde, Vladimir Demidyuk, Alkis Gkelios and Carl Tipton
Exploring Microemulsion-Prepared Lanthanum Catalysts for Natural Gas Valorisation
Catalysts for small scale application in natural gas and biomass conversion
20 September 2019
By Cristina Estruch Bosch, Stephen Poulston, Paul Collier, Joris Thybaut, Guy Marin
Making the Most of Precious Metal Nanoparticles in the Purification of Industrial Wastewater by Catalytic Wet Air Oxidation
Revealing synergy between platinum and catalyst support
3 October 2018
By Korrin Saunders, Dafydd Davies, Stan Golunski, Peter Johnston and Pawel Plucinski
Oxidative Degradation of Phenol using in situ Generated Hydrogen Peroxide Combined with Fenton’s Process
Supported palladium-iron catalysts for the removal of model contaminants from wastewater
3 October 2018
By Ricci Underhill, Richard J. Lewis, Simon J. Freakley, Mark Douthwaite, Peter J. Miedziak, Ouardia Akdim, Jennifer K. Edwards, Graham J. Hutchings
Using Catalytic Heat Recovery to Improve Efficiency of Gasoline Spark Ignition Engines
Chemical efficiency calculations predict fuel economy improvements up to 14%
18 September 2018
By Perry Leung, Athanasios Tsolakis, José Herreros, Miroslaw Wyszynski and Stan Golunski
Additive Layer Manufacturing of Catalytic Static Mixers for Continuous Flow Reactors
Versatile technique provides economic and practical advantages to the flow chemist
3 July 2018
By Christian Hornung, Shravan Singh and Simon Saubern