Effects of Material Type on Biofilm Response to an Oxidising Biocide in a Laboratory-Scale Cooling Tower System
Effect of material type in response to biocide
14 January 2021
By Nazmiye Ozlem Sanli
Platinum Group Metals Recovery Using Secondary Raw Materials (PLATIRUS): Project Overview with a Focus on Processing Spent Autocatalyst
Novel pgm recycling technologies ready for demonstration at next scale
4 January 2021
By Giovanna Nicol, Emma Goosey, Deniz Şanlı Yıldız, Elaine Loving, Viet Tu Nguyen, Sofía Riaño, Iakovos Yakoumis, Ana Maria Martinez, Amal Siriwardana, Ainhoa Unzurrunzaga, Jeroen Spooren, Thomas Abo Atia, Bart Michielsen, Xochitl Dominguez-Benetton and Olga Lanaridi
Bacterial Community Composition in Produced Water of Diyarbakır Oil Fields in Turkey
Bacterial communities in produced waters of south-eastern Turkey reported in detail for the first time
28 September 2020
By Tuğçe Tüccar, Esra Ilhan-Sungur and Gerard Muyzer
Preparation and Evaluation of a Composite Filler Micro-Embedded with Pseudomonas putida for the Biodegradation of Toluene
Preparation of composite filler with high toluene removal efficiency
7 September 2020
By Yuxi Yan, Rencheng Zhu, Shunyi Li
Insights into Automotive Particulate Filters using Magnetic Resonance Imaging
Understanding filter drying in the manufacturing process and the effect of particulate matter on filter operation and fluid dynamics
16 March 2020
By Jonathan Cooper, Nicholas Ramskill, Andy Sederman, Lynn Gladden, Athanasios Tsolakis, Hugh Stitt and Andrew York
Intensified Liquid-Liquid Extraction Technologies in Small Channels: A Review
14 October 2019
By Panagiota Angeli, Eduardo Garciadiego Ortega, Dimitrios Tsaoulidis, Martyn Earle
Exploring Microemulsion-Prepared Lanthanum Catalysts for Natural Gas Valorisation
Catalysts for small scale application in natural gas and biomass conversion
20 September 2019
By Cristina Estruch Bosch, Stephen Poulston, Paul Collier, Joris Thybaut, Guy Marin
Continuous Production of Squalane Using 3D Printed Catalytic Supports
Additive manufacturing confers advantages for catalyst support design
4 July 2019
By Sonia García, Stephen Poulston, Deena Modeshia, Petr Stavarek, Massimo Ujcic, Farzad Lali, Manuel Alves, José Araújo, Michael Krusche, Frank Ullrich, Diana Maier
Additive Layer Manufacturing of Catalytic Static Mixers for Continuous Flow Reactors
Versatile technique provides economic and practical advantages to the flow chemist
3 July 2018
By Christian Hornung, Shravan Singh and Simon Saubern
Challenges and Opportunities in Fast Pyrolysis of Biomass: Part II
Upgrading options and promising applications in energy, biofuels and chemicals
21 February 2018
By Tony Bridgwater