Optimising Platinum-Rhodium Thermocouple Wire Composition to Minimise Composition Change Due to Evaporation of Oxides
Determining the optimal composition as a function of temperature
24 August 2016
By Jonathan V. Pearce
Selected Electrical Resistivity Values for the Platinum Group of Metals Part III: Ruthenium and Osmium
Improved values obtained for ruthenium and osmium
8 June 2016
By John Arblaster
Selected Electrical Resistivity Values for the Platinum Group of Metals Part II: Rhodium and Iridium
Improved values obtained for liquid phases of rhodium and iridium
1 February 2016
By John Arblaster
Optimisation of the Recrystallisation Annealing Regime of Pd-5Ni Alloy
Using experimental design and statistical analysis to understand the metallurgical properties of palladium alloy for ammonia oxidation catchment gauze applications
7 January 2016
By Aleksandra Ivanović, Biserka Trumić, Svetlana Ivanov, Saša Marjanović, Milorad Zrilić, Tatjana Volkov-Husović and Branka Petković
Sintering and Additive Manufacturing: The New Paradigm for the Jewellery Manufacturer
European jewellery industry poised to develop potential of direct metal laser melting in precious metals
31 July 2015
By Frank Cooper
Selected Electrical Resistivity Values for the Platinum Group of Metals Part I: Palladium and Platinum
Improved values obtained for liquid phases of palladium and platinum
15 June 2015
By John Arblaster
Determining Temperature Boundary of the A1→(A1+B2) Phase Transformation in the Copper-55 at% Palladium Alloy Subjected to Severe Plastic Deformation
Higher temperature of phase transformation found for Cu-55 at% Pd alloy
25 September 2014
By Oksana S. Novikova and Alexey Yu. Volkov
Recent Developments in the Study of the Surface-Stability of Platinum and Platinum-Iridium Mass Standards
Quantifying mercury and carbon contamination on platinum-iridium alloy surfaces using XPS
28 August 2014
By Peter Cumpson
Thermophysical Properties of Platinum Group Metals in their Liquid Undercooled and Superheated Phases
Measurements in the liquid state, including the undercooled region, over wide temperature ranges with an electrostatic levitator
15 July 2014
By Paul-François Paradis, Takehiko Ishikawa and Junpei Okada
Is Osmium Always the Densest Metal?
A comparison of the densities of iridium and osmium
15 July 2014
By John W. Arblaster